CAD functions: See operating CAD .. see also Codes Variables Bodies use shortcut key B.## B Conus PT/PT/R/R CON

Conical body (cone) from 2 points and 2 radii Points: the epicenters of the circles Format: B2 = CON Point1 Point2 Radius1 Radius2 Example: B20 = CON P (0 0 0) P (100 0 0) VAL (60) VAL (40)## B Conus Circ,height,radius CON

Conical body (cone) from circle, height and radius at top. Example: C20 = P (0 0 0) VAL(100) DX B20 = CON C20 VAL(200) VAL(60)## B Torus Axis/R/R TOR

Torus (circular ring) from central axis, outer circle radius and inner circle radius Outer circle radius is on the outside and is always positive. B # = TOR LC / / Axle outer circle B # = TOR CC / / Main outer circle circle B # = TOR RC / / Basic level outer circle Example: B20 = TOR P (0 0 0) DR VAL (100) VAL (25)## B Torus Axis/CI TOR

Torus (circular ring) from axis circle Region: Horizontal circle Example: C20 = P (100 0 0) VAL (25) DY B20 = TOR P (0 0 0) DR C20## B Sphere Center,radius SPH

Sphere center, radius / item / region Point: distance radius from center point Region: only over the radius # Focal radius B1 = SPH P (0 0 0) 12 # Sphere from region: C1 = P (0 0 0) 12 B2 = SPH C1## B Prism Base Thick/Point(Cone) PRISM

Prism from base area and thickness / Point Base Area: closed polygon (planar) / Circle / Ellipse As a point opposite surface; conical prism. B = PRISM PlanarBaseSurface Vector / Point / Thickness Example: # Prism circle with a thickness of (cylinder height) C20 = P (289 -20.8 0) VAL (125) DR B20 = PRISM C20 25 # Prism cone from Polygon P20 = P (768 -457 0) S20 = POL P20 P (930 -474 0) P (1029 -251 0) P (971 -246 0) P (891 -412 0) P (801 -407 0) P20 B21 = PRISM S20 | P (900 -500 200)## B Prism Base Vec PRISM

Prism from base area and vector Base Area: closed polygon (planar) / Circle / Ellipse Example: # Prism of parallelogram and vector S20 = P REC (100 0 0) D (50 0 0) D (0 12 0) B20 = PRISM S20 D (0 0 10)