gCAD3D 2.35
ut_tol_const.h
Go to the documentation of this file.
1 /***************************************************************************
2  ut_const.h - description
3  -------------------
4  begin : Fri Aug 25 2000
5  copyright : (C) 2000 by CADCAM-Services Franz Reiter
6  email : franz.reiter@cadcam.co.at
7 
8 ****************************************************************************
9 
10 *//*
26 
27 */
28 
29 
30 
31 
32 //================================================================
33 // constant Tolerances:
34 double UT_TOL_min2 = 1E-12;
35 double UT_TOL_min1 = 0.00000001;
36 double UT_TOL_min0 = 0.0000005;
37 double UT_TOL_PAR = 0.00001;
38 double UT_TOL_Ang1 = 0.00017;
39 double UT_TOL_Ang2 = 0.0002;
40 double UT_TOL_0Cos = 0.0000001;
41 
42 // Angles: degree-val: 1=0.017 0.1:0.002 0.01=0.0002
43 
44 
45 //================================================================
46 // Tolerances depending on Modelsize: APT_ModSiz (../ci/NC_Main.c)
47 // Defaultvalues with Modelsize=500:
48 
50 double UT_TOL_pt = 0.0001;
51 
53 double UT_TOL_ln = 0.001;
54 
56 double UT_TOL_cv = 0.005; // Angle: ca 0.3 degree
57 
59 double UT_DISP_cv = 0.05; // 2003-09-05: 0.05; war 0.01
60 
62 double UT_DISP_ln = 1000.;
63 
64 
65 
66 //================ EOF =====================
double UT_TOL_min0
Definition: ut_tol_const.h:36
double UT_TOL_0Cos
tolerance for zero cosine
Definition: ut_tol_const.h:40
double UT_TOL_Ang2
Angle 0.1 degree.
Definition: ut_tol_const.h:39
double UT_TOL_ln
max deviation of points from line
Definition: ut_tol_const.h:53
double UT_DISP_ln
length of construction-lines
Definition: ut_tol_const.h:62
double UT_TOL_PAR
tolerance for parallelism
Definition: ut_tol_const.h:37
double UT_DISP_cv
max. display-deviation for circles, curves
Definition: ut_tol_const.h:59
double UT_TOL_Ang1
Angle 0.01 degree.
Definition: ut_tol_const.h:38
double UT_TOL_min2
Definition: ut_tol_const.h:34
double UT_TOL_pt
identical Points-tolerence
Definition: ut_tol_const.h:50
double UT_TOL_min1
Definition: ut_tol_const.h:35
double UT_TOL_cv
max analytical deviation for curves
Definition: ut_tol_const.h:56