gCAD3D 2.40
ut_TX.h File Reference

Go to the source code of this file.

Functions

void TX_Print (char *,...)
 ========================================================== More...
 
void TX_Error (char *,...)
 ========================================================== More...
 
void TX_Write (char *)
 ========================================================== More...
 

Function Documentation

void TX_Print ( char *  ,
  ... 
)

==========================================================

==========================================================

* formatted write into messagewindow.
* Example:
* TX_Print (".. distance is %lf", d1);
*
* display message
* 0-10 parameters; max. 250 characters
* Example:
* TX_Print (".. distance is %lf", d1);
*
void TX_Error ( char *  ,
  ... 
)

==========================================================

========================================================== formatted errortext into messagewindow. Example: TX_Print (".. distance must not exceed %lf", d1);

* display message and raise error
* 0-10 parameters; max. 250 characters
* Example:
* TX_Print (".. distance must not exceed %lf", d1);
*
* Set/reset Errors: see AP_errStat_set ()
*
void TX_Write ( char *  )

==========================================================

========================================================== direkt rausschreiben.

display message